'

HOW TO INSTALL ANDROID FROYO 2.2 ON XPERIA x8


     DOWNLOAD THIS 2 FILES TO GET STARTED
Android 2.2 Froyo Custom ROM
xRecovery 0.1



B4 u get starte make sure u backup of your phone,
After backing up your phone then you are all set to begin the installation of “Android Froyo’s Custom ROM”. Follow the steps for installation of Froyo on your phone.

   1. Create a new folder on your desktop
   2. Now move the downloaded “Android Froyo Custom ROM” to the  folder.
   3. XTRACT The Custom ROM USING WinRAR.
   4. Connect your  X8 Phone with your PC via USB cable.
   5. Select “Open Folder to view files” in the Autoplay box and then click on OK.
   6. Now Go To backup folder present inside the xrecovery folder (xrecovery – > backup)
   7. Copy “Android Froyo Custom ROM’s” folder to backup folder from  folder.
   8. When it’s done, disconnect your phone from your PC.
   9. Switch/Power off your phone and wait for five seconds.
  10. Now Switch/Power on your phone again and as soon as the Sony Ericsson logo flashes on the screen  press N HOLD the back key.
  11. This will take you to the Xrecovery menu.  (This happens only when you have installed xrecovery on your phone.)
  12. Now Select “Backup & Restore”  menu
  13. Click on Restore.
  14. Now you will see 2 files
      1. The backup of your phone
      2. “Android Froyo Custom ROM” file
  15. Select the “Android Froyo Custom ROM” file .
  16.  Select “Yes – Restore”
  17. Be patient, it will take some  time.
  18. After installation has finish Select “Reboot” From That Menu and Press Enter.
  19.  Android Froyo get’s installed on your phone.


How 2 Root & UnRoot X10i,X10a, X10Mini

Download  UniversalAndroot apk.  
and Install the above apk on your device.

Root 
Once installed, all you hav 2 do is click the root button and you should have a rooted handset.
UnRoot 
The apk also has an unroot button, so if you don’t want it  you can always revert back.
Benefits
 Benefits of rooting include being able to run root-only apps such as Titanium Backup and Barnacle Wifi Tether that turns your X10 into a wireless hotspot.

HOW 2 RUN ANY LIVECD ON WINDOWS WITHOUT INSTALLATION

FOLLOW THE STEPS BELOW TO RUN LIVECD ON WINDOWS

  1. Go to http://mobalivecd.mobatek.net/en/ and download the application. It is a standalone application, which need no installation. Hence, you can bring along it with your USB drive.
  2. After you downloaded the application, double-click it and you will see the screen as above screenshot. Click the “Run the LiveCD” button, and then you can select your ISO image file.
  3. After that, MobaLiveCD will ask you whether want to create a hard disk image for your virtual machine. If you want to save your works and retrieve them on next launch, select “Yes” and specify the location, else select “No“.
  4. Your Live CD will now start booting and you can click the window to interact with your emulated OS, or press “Ctrl + Alt” to return to your current environment.
Tips: You can select the “Right-Click Menu” at the Main menu page so that you can run MobaLiveCD through your right-click context menu. To remove this feature, press the “Uninstall” button.

HOW 2 MAKE XP GENUINE 4EVA

Follow These Steps:

1) Open Notepad
2) Paste the following info in quotes:


Quote:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion]
"CurrentBuild"="1.511.1 () (Obsolete data - do not use)"
"ProductId"="55274-640-7450093-23464"
"DigitalProductId"=hex:a4,00,00,00,03,00,00,00,35, 35,32,37,34,2d,36,34,30,2d,\
37,34,35,30,30,39,33,2d,32,33,34,36,34,00,2e,00,00 ,00,41,32,32,2d,30,30,30,\
30,31,00,00,00,00,00,00,00,62,fc,61,4c,e0,26,33,16 ,05,d3,54,e7,a0,de,00,00,\
00,00,00,00,49,36,c2,49,20,47,0c,00,00,00,00,00,00 ,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,33,33,35,30,30,00 ,00,00,00,00,00,00,65,10,\
00,00,74,99,dd,b0,f7,07,00,00,98,10,00,00,00,00,00 ,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00 ,c4,ae,d6,1c
"LicenseInfo"=hex:e7,77,18,19,f8,08,fc,7d,e8,f0,df ,12,6e,46,cb,3f,ad,b2,dd,b9,\
15,18,16,c0,bc,c3,6a,7d,4a,80,8b,31,13,37,5a,78,a2 ,06,c8,6b,b9,d9,dd,cc,6a,\
9c,c5,9b,77,aa,07,8d,56,6a,7c,e4

[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\WPAEvents]
"OOBETimer"=hex:ff,d5,71,d6,8b,6a,8d,6f,d5,33,93,f d



3) In notepad click FILE>SAVEAS.

4) For file type in the save dialog box select "all files" and for the filename type in .reg or whatever you want. It doesn't matter as long as it has the .reg extension.

5) Click save.

6) Double click the file that's now on your desktop.

7) It will ask you "are you sure" click YES & Restart Your PC.

iOS 4.2.1 CUSTOM ipsw files ( made with PwangeTool )

Well in the case of an HFS volume name on iOS, an untether exploit — as the Chronic Dev Team revealed last week with an untether for the 4.2.1 jailbreak, which had previously been a tethered JB for most recent devices since 4.2.1’s release in November. With their permission, we’ve incorporated their 4.2.1 “feedface” untether into today’s PwnageTool 4.2. This means iPhone unlockers can safely restore to a custom 4.2.1 pre-jailbroken IPSW and retain their current baseband and unlock. PwnageTool also supports all the other 4.2.1.
PwnageTool also includes two very recent improvements to the 4.2.1 JB: iBooks was just fixed by @comex and @pushfix last night so that it works as intended on DRMed books, and the wifi problem on AppleTV 2G was fixed by @nitotv, @DHowett, and @saurik. Both of these fixes will also be available in upcoming Cydia package updates, so if you’re already jailbroken you can wait for those updates rather than restore and jailbreak again.
Before starting make sure :
Add sauriks server to the hosts file before using any custom ipsw file !!!
Windows PC : C:\Windows\System32\drivers\etc\hosts (Windows)
Mac : /etc/hosts (Mac OS X) and add the following entry to the bottom of the file.

74.208.10.249 gs.apple.com



ACTIVATED ( for people who are not on official carrier SIM card)
UN-ACTIVATED(for people who have official carrier SIM card)

iPhone 4
ACTIVATED:
Hotfile.com: One click file hosting: iPhone 4 iOS 4.2.1 -ACTIVATED- CUSTOM ipsw.zip
UN-ACTIVATED:
Hotfile.com: One click file hosting: iPhone 4 iOS 4.2.1 -UNactivated- CUSTOM ipsw.zip

iPhone 4(CDMA)
Hotfile.com: One click file hosting: iPhone 4 (CDMA) verizon-UNactivated- iOS 4.2.6 CUSTOM ipsw.zip

iPhone 3GS
ACTIVATED:
Hotfile.com: One click file hosting: iPhone 3GS iOS 4.2.1 -ACTIVATED- CUSTOM ipsw.zip
UN-ACTIVATED :
Hotfile.com: One click file hosting: iPhone 3GS iOS 4.2.1 -UNactivated- CUSTOM ipsw.zip

iPhone 3G

ACTIVATED all FUNCTIONS enabled
Hotfile.com: One click file hosting: iPhone 3G iOS 4.2.1 -ACTIVATED- all functions enabled CUSTOM ipsw.zip
ACTIVATED : NO extra FUNTIONS
Hotfile.com: One click file hosting: iPhone 3G iOS 4.2.1 -ACTIVATED- NO functions - CUSTOM ipsw.zip
UN-ACTIVATED : all FUNCTIONS enabled
Hotfile.com: One click file hosting: iPhone 3G iOS 4.2.1 -UNactivated- all functions enabled CUSTOM ipsw.zip
UN-ACTIVATED : NO extra FUNTIONS
Hotfile.com: One click file hosting: iPhone 3G iOS 4.2.1 -Unactivated- NO functions CUSTOM ipsw.zip


iPad
Hotfile.com: One click file hosting: iPad iOS 4.2.1 -UNactivated- CUSTOM ipsw.zip

iPod 4G (4th gen)
Hotfile.com: One click file hosting: iPod 4th gen iOS 4.2.1 CUSTOM ipsw.zip

iPod 3G (3rd gen)
Hotfile.com: One click file hosting: iPod 3rd gen iOS 4.2.1 CUSTOM ipsw.zip

Apple TV 2G
Hotfile.com: One click file hosting: AppleTV 2G iOS 4.2.1 CUSTOM ipsw.zip

HOW to UPGRADE :

1- Connect iPhone to iTunes
2- Bring iphone or ipad or iPod to DFU mode (Mahmood Andishmand Welcomes you all !! - iPhone Tweaks)
3- iTunes u detects (remember u should not be in recovery mode !!!) it and you will see (RESTORE and upgrade) buttons
4- Now press keyboard SHIFT) key + RESTORE button itunes at the same time
5- Browse to the ipsw file u have downloaded
6- Start restoring
7- After completed open cydia and update cydia and for unlock just install ULTRASN0W

Reply With Quote


02-18-2011 09:33 AM

Muammil. Powered by Blogger.