Open an administrator command prompt, and type ‘powershell.exe’ (no quote marks)
Copy and Paste each of the following commands in the same powershell command prompt in this exact order. Wait for each command to complete before typing the next one.
For weeks now we have been filling in the news regarding the Microsoft's Talkman and Cityman Lumia phones due later this fall.
Possibly going by the names Lumia 950 and Lumia 950 XL these phones should represent the next-generation of high-end devices for the struggling mobile maker.
Ctrl + D Add current site to favorites or reading list
Ctrl + E Open a search query in the address bar
Ctrl + F Find on page
Ctrl + H Open history pane
Ctrl + I Open favorites pane
Ctrl + J Open downloads pane
Ctrl + K Duplicate tab
Ctrl + L or F4 or Alt + D Select the address bar
Ctrl + N Open a new window
Ctrl + P Print the current page
Ctrl + R or F5 Refresh the page
Ctrl + T Open a new tab
Ctrl + W Close current tab
Ctrl + Shift + P Open a new InPrivate Browsing window
Ctrl + Shift + R Enter reading view
Ctrl +1, 2, 3,…, 8 Switch to a specific tab number
Ctrl + 9 Switch to the last tab
Ctrl + plus (+) Zoom in (25%)
Ctrl + minus (-) Zoom out (25%)
Ctrl + 0 Reset zoom level
Backspace or Alt + Left arrow Go back
Alt + Right arrow Go forward
Esc Stop loading the page
Ctrl + click Open link in a new tab
Ctrl + Tab Switch to the next tab
Ctrl + Shift + Tab Switch to the previous tab
Ctrl + Shift + click Open link in a new tab and switch to the tab
Alt + Shift + click Open link in a new window
To perform a clean installation of Windows 10, you'll be needing your product key to activate, as such you want to make sure you know this information before doing anything else. There are various tools and methods to recover your product key, I personally like to use the Magical Jelly Bean Keyfinder tool. This is a free tool that is easy to download and use. (During the installation of the tool, make sure to select the custom installation and remember to uncheck the installation of additional add-ons.)
Once you run the tool, make sure to export the information to a USB drive and/or write down the product key on a piece of paper. Download Windows10
If you're downloading Windows 10 manually, when using the "Download Tool" make sure you select your correct version (32- or 64-bit). If you don't know, go to Control Panel\All Control Panel Items\System, and under System type, you'll see what version you need to download.
When you launch the Download Tool, you'll will be given two choices, here you want to use the Upgrade this PC now option, and then follow the on screen instructions. The upgrade process should only take around 20-30 minutes, but the time will depend on your internet connection and hardware in question.
The Microsoft Lumia 640
XL comes with a 5.7-inch display (versus a 5-inch display on the Lumia
640), and it runs on Windows Phone 8.1 with the promise to get upgraded
to Windows 10. Its features include a 1.2GHz quad-core procesor, 1GB of
RAM, 8GB of storage, 13-megapixel main camera and a 5-megapixel shooter
on the front.
This Tool Allows you to repartition your MTK internal Storage by allocating more GB to it. Follow the video carefully to learn. You must be rooted and have custom recovery before you can achieve it.
Hi
all welcome to a new series by me called MTK-Tricks. It enable hidden menu on some MTK Device known as Engineering /Android Mode. Though there are some App at the playstore that does. I tested this on a MTK6577
but it should work on any 4.0+ MTK phone. I spent a while discovering
and testing these codes, Just say thanks....
LetsGetStarted
Engineer mode
Huge list of developer options for testing touch,gps,wifi,display,etc.
*#*#3646633#*#*
Samsung Logo
"Registers" you phone and make the boot logo the original Samsung.
*#*#91#*#*
Testing Menu
Various testing options
*#*#4636#*#*
Language And Input
Language and Keyboard settings
*#*#97#*#*
Reset Sim
This was a SIM reset on the 77.
*#*#46*#*#
Google Talk Service Monitor
Complete monitor For Google Talk.
*#*#8255#*#*
[GUIDE] How to ReadBack ROM using SP FlashTool, to make the CWM recovery, to install SuperUser (get root) etc..
If your phone not rooted using the ROOT button.
Tips:
Make sure you installed al necessary drivers for you get started.DOWNLOAD ADB DRIVER Here
Make sure USB DEBUGGING is enabled. 1. Make scatter by means of MTKDroidTools. Download (MTKDROIDTOOL) Here
Scatter is the text file with addresses of the blocks, necessary for the SP FlashTool program. After creation of scatter don't close the main window of the program! Otherwise once again it is necessary to turn on phone. 2. In SP FlashTool choose this scatter and go on the Read Back tab. 3. Choose path and a ROM file name
Click on Add button. Double click of a mouse on the appeared line.
Choose a file name, the name has to begin with ROM_ as offers
FlashTool! Remember path and the name of ROM_ file. 4. Determine the ROM_ size
Type has to stand in HEX. In the field of Start Address it is necessary
to write down 0x000000. In the field of Length we copy from scatter the
address of the block following after RECOVERY or the address of other
block for fuller backup. For phones with type of the blocks EXT4 it is
the cache block address. The number in the Hex format has to begin with
0x 5 . Choose Read Page Only on yaffs2 type blocks phones
In FlashTool choose Read Page Only in the field of Read Method. If this
field isn't present, the window with this question can emerge, too we
choose Page Only. On phones with EXT4 blocks it doesn't get out (as a
rule). 6. Read Back ROM_
Click on Read Back button and connect the switched-off
phone to PC. Here the options depending on a concrete phone are
possible. Maybe it is necessary to press at the same time with connect
of a cable the camera or volume buttons. Experiment and study work with
FlashTool in threads with similar phones! On some MT6573 models, for
example on B63, it can't be executed with any combinations and only
testpoint need! 7. Prepare files for FlashTool and make CWM
If everything passed without errorss, we open the MTK Droid Root &
Tools window which we left on 1th step. If for some reason the window
isn't present, it is necessary to turn on phone and to connect it to the
program. Click on To process file ROM_ from FlashTool button and
choose the ROM_* file saved on the 6th step. At successful unpacking
rom it will be offered to choose CWM from similar phone. Chosen CWM it
is checked on compliance to the connected phone and if ok, the CWM is
created. Starting with v2.4.0 CWM it is made automatically and the file from similar phone shouldn't be looked for any more!
Аttention! Yaffs2 type blocks from this backup can't be Downloaded to
phone, they aren't correct! Use backup on 9th step if phone have yaffs2
type blocks! 8. Download new CWM to the phone
Start FlashTool, choose scatter in the folder created on the 7th step.
Remove marks from all blocks! Click on RECOVERY and we choose the file
CWM in the same folder which was created on the 7th step. Click Download
and connect a cable to PC (phone has to be switched off) and expect
the end of process. DANGEROUS! On this step the CWM
recovery block has to be marked only! Also it is necessary to use only
the Download button and not to use at all the Firmware Upgrade button! 9. Make backup, install SuperUser etc
Load phone in CWM mode, connect to MTK Droid Root & Tools, go on the tab root, backup, recovery and, pressing on this tab the necessary buttons, we do:
- backup! ! ! (if in phone there is yaffs2 type blocks, do here surely, they received with readBack on 7th step aren't correct)
- install superuser (often mean "get root" under it)
- and other if need
Never needlessly Download preloader and DSP_BL
blocks! It is always dangerous! On some models of phones (for example
Alcatel) you will have a brick even if you download these blocks read
from phone which you own! Always remove from them marks in SPFT!
Steps are as follows: 1 Downloadthis and unzip 2 download the recovery image here and put it into the same folder as the first 3 Goto Settings and enable USB Debugging and Allow UNKNOWN Software 4 Connect the usb to your android phone and run the flash.bat file. Here is the link to the stock recovery.img in case if you want to revert....
10.System10 step 4- extract contents of tools_needed
step 5-
use 7zip to extract the 10 split sys.yaffs2.img file (this can be done
by copying them to the same folder the right clicking and selecting
7zip, extract archive)
step 6- boot your N3 into fast boot mode (this is done easily by removing the battery, and while holding volume-down button on plug in your usb cable, then wait till you see the TECNO logo displayed on the screen, wait for 5 second then release the volume-down button)
step 7 FLASHING THE TECNO:
now, run Android AIO flasher.exe (found in tools needed folder)
next, in the AIO flasher window, the very first menu is what concerns us i.e. where its written fastboot flasher (Nandroid Restorer)(the others we shall explain in later tutorials)
click boot
click Select file(browse to where you saved the boot.img you downloaded above)
click erase
click flash
Wait for "writing boot...OK" before you know its done
Repeat the same process for the sys.yaffs2.img file, only this time, we go:
click System
click Select file(browse to where you saved the sys.yaffs2.img you downloaded above)
click erase
click flash
Wait to show "writing sys.yaffs2.img OK" before you know its done.Unplug the usb cable,
now, while holding "volume-up" plug it back
keep holding volume up till you enter the Android 3e stock recovery menu.
using volume up and down to move
select "wipe cache", PRESS power button to select
when this is finished
select "wipe data/factory reset". Unplug usb, remove & put battery. power device and you are done.
How to ReadBack ROM using SP FlashTool, to cook CWM recovery & install SuperUser (get root) etc..
If your phone not rooted using the ROOT button.
Tips:
Make sure you installed all necessary drivers for you get started.DOWNLOAD ADB DRIVER Here
Make sure USB DEBUGGING is enabled.
1. Make scatter by means of MTKDroidTools. Download (MTKDROIDTOOL) Here
Scatter is the text file with addresses of the blocks, necessary for the SP FlashTool program. After creation of scatter don't close the main window of the program! Otherwise once again it is necessary to turn on phone. 2. In SP FlashTool choose this scatter and go on the Read Back tab. 3. Choose path and a ROM file name
Click on Add button. Double click of a mouse on the appeared line.
Choose a file name, the name has to begin with ROM_ as offers
FlashTool! Remember path and the name of ROM_ file. 4. Determine the ROM_ size
Type has to stand in HEX. In the field of Start Address it is necessary
to write down 0x000000. In the field of Length we copy from scatter the
address of the block following after RECOVERY or the address of other
block for fuller backup. For phones with type of the blocks EXT4 it is
the cache block address. The number in the Hex format has to begin with
0x 5 . Choose Read Page Only on yaffs2 type blocks phones
In FlashTool choose Read Page Only in the field of Read Method. If this
field isn't present, the window with this question can emerge, too we
choose Page Only. On phones with EXT4 blocks it doesn't get out (as a
rule). 6. Read Back ROM_
Click on Read Back button and connect the switched-off
phone to PC. Here the options depending on a concrete phone are
possible. Maybe it is necessary to press at the same time with connect
of a cable the camera or volume buttons. Experiment and study work with
FlashTool in threads with similar phones! On some MT6573 models, for
example on B63, it can't be executed with any combinations and only
testpoint need! 7. Prepare files for FlashTool and make CWM
If everything passed without errorss, we open the MTK Droid Root &
Tools window which we left on 1th step. If for some reason the window
isn't present, it is necessary to turn on phone and to connect it to the
program. Click on To process file ROM_ from FlashTool button and
choose the ROM_* file saved on the 6th step. At successful unpacking
rom it will be offered to choose CWM from similar phone. Chosen CWM it
is checked on compliance to the connected phone and if ok, the CWM is
created. Starting with v2.4.0 CWM it is made automatically and the file from similar phone shouldn't be looked for any more!
Аttention! Yaffs2 type blocks from this backup can't be Downloaded to
phone, they aren't correct! Use backup on 9th step if phone have yaffs2
type blocks! 8. Download new CWM to the phone
Start FlashTool, choose scatter in the folder created on the 7th step.
Remove marks from all blocks! Click on RECOVERY and we choose the file
CWM in the same folder which was created on the 7th step. Click Download
and connect a cable to PC (phone has to be switched off) and expect
the end of process. DANGEROUS! On this step the CWM
recovery block has to be marked only! Also it is necessary to use only
the Download button and not to use at all the Firmware Upgrade button! 9. Make backup, install SuperUser etc
Load phone in CWM mode, connect to MTK Droid Root & Tools, go on the tab root, backup, recovery and, pressing on this tab the necessary buttons, we do:
- backup! ! ! (if in phone there is yaffs2 type blocks, do here surely, they received with readBack on 7th step aren't correct)
- install superuser (often mean "get root" under it)
- and other if need
Never needlessly Download preloader and DSP_BL
blocks! It is always dangerous! On some models of phones (for example
Alcatel) you will have a brick even if you download these blocks read
from phone which you own! Always remove from them marks in SPFT!
IF YOU FIND IT DIFFICULT FOLLOW THE SECOND OPTION BELOW:-
The minute you know that your laptop is lost or stolen, login to your DeviceTrack.net account and begin tracking your device. You can download any important files, locate the device, (lock it if desired), then contact your local police department with the information this software provides about your laptop's whereabouts and whoever may have possession of it (cam snapshot and monitor snapshot). Do not attempt to apprehend, reclaim any person or property or take any action on your own behalf that may put you or others at any kind of risk, without the assistance of law enforcement (police).
Many law enforcement agencies simply won't take action to recover your laptop with only an IP address to go on. DeviceTrack.net often has the thief's picture, address, and other personal details — This is why you need DeviceTrack.net RIGHTNOW so that you or the police can login and see everything the thief is up to on your stolen laptop. Involving law enforcement is only one of the solutions the DeviceTrack.net employs to recover your laptop but if they deem it necessary, all of the information that has been recorded on the thief's activities make it a snap to get their involvement.
Lots of us rely on GPS navigation technology for directions around towns and cities, but not DeviceTrack.net. Our software suite doesn't rely on GPS technology alone but also WiFi signals. DeviceTrack.net works by sniffing for WiFi signals that are in range, then measuring signal strength and comparing those results with a database in order to pinpoint the exact location of your stolen laptop. WiFi Positioning Systemsare a very useful and increasingly popular method, especially for urban areas where GPS signals don't penetrate and accuracy is of the utmost importance.
You can use the Error-checking tool to check for file system errors and bad sectors on your hard disk.
Open My Computer, and then select the local disk you want to check.
On the File menu, click Properties.
On the Tools tab, under Error-checking, click Check Now.
Under Check disk options, select the Scan for and attempt recovery of bad sectors check box.
Notes
To open My Computer, click Start, and then click My Computer.
All files must be closed for this process to run. If the volume is currently in use, a message box will appear prompting you to indicate whether or not you want to reschedule the disk checking for the next time you restart your system. Then, the next time you restart your system, disk checking will run. Your volume will not be available to perform other tasks while this process is running.
If your volume is formatted as NTFS, Windows automatically logs all file transactions, replaces bad clusters, and stores copies of key information for all files on the NTFS volume.
Notes
